商标国际注册马德里体系

大爱无疆

Item 9:  Miscellaneous Indications

Item 9(a):  Transliteration
71 Transliteration is not to be confused with translation.  Where the mark consists of, or contains, matter in characters other than Latin characters, or numerals other than Arabic or Roman numerals, a transliteration into Latin characters or Arabic numerals must be provided.  Transliteration is a phonetic representation of the mark in Latin characters, following the phonetics of the language of the international application.  In simple terms, the mark, as it sounds, is reproduced in Latin characters.  Transliteration is provided for in item 9(a) of the form.  

Item 9(b):  Translation
72 Where the mark consists of or contains words which may be translated, it is advisable, where possible, to provide such a translation.  Provision for translation is made in item 9(b) of the form.  The translation may be into English and/or French and/or Spanish, irrespective of the language of the international application.  The provision of a translation, at the option of the applicant, may forestall requests for a translation by the Office of a designated Contracting Party.  The International Bureau will not check the accuracy of any translation of the mark, nor will it question the absence of a translation or provide a translation of its own.  

Item 9(c):  Mark that Cannot be Translated
73 Where the applicant is aware that the word or words appearing in the mark cannot be translated (that is, they are merely invented or made-up words), this may be indicated by checking the box in item 9(c) of the form.  This is intended to forestall a request by the Offices of designated Contracting Parties for translation.  Obviously, it will be possible to complete either item 9(b) or 9(c), but not both in the same international application form.  


  Item 9(d):  Special Type of Mark

74 Where the mark is a three-dimensional mark, a sound mark or a collective, certification or guarantee mark, this should be indicated by checking the appropriate box in item 9(d) of the form.  Note that such an indication may be given only if it appears in the basic registration or basic application.

75 In the case of a collective, certification or guarantee mark, regulations governing the use of the mark are not required as part of the international application, and should not be sent to the International Bureau with the international application.  A designated Contracting Party may, however, ask for such regulations to be filed.  
In order to forestall a refusal by such a Contracting Party, an applicant may wish to send the required documents directly to the Office of that Contracting Party as soon as he receives from the International Bureau the certificate of international registration.  


  Item 9 (e):  Description of the Mark

76 Where there is a description included in the basic mark, the applicant may decide to include, or not, the same description in the international application.  It may happen also that where there is a description in the basic mark, the Office of origin will require that the same description is contained in the international application form.  

77 If the mark is not of one of the types of other marks provided for in the international application form
(three-dimensional, sound mark or collective, certification or guarantee mark), then the space for a description may be utilized to elaborate on the nature of the mark – for example, it may indicate that the mark is a hologram or a motion mark.  However, in such case, the description must still correspond with the description that is contained in the basic mark.  

78 If the description of the basic mark is in a language which is not the language used in the international application, then it should be translated accordingly.  The International Bureau will not concern itself with the accuracy of the description.  Furthermore, if the description, as given, is not entirely in conformity with the mark as reproduced, in principle, the International Bureau will not question or query this either.  The formulation of the description is dependent upon the description attributed to the basic mark, and is a matter for the applicant.  

大爱无疆

62 The International Bureau will assign a classification in accordance with the International Classification of the Figurative Elements of Marks (Vienna Classification) where the mark is not a mark in standard characters.  

Mark Consists of a Color or of a Combination of Colors, as Such
63 In many jurisdictions, a color, as such, or a combination of colors may, in itself or themselves, function as a trademark, to differentiate goods and services of one enterprise from those of another.  It is important to distinguish between marks that consist of a color, or colors, as such, and marks that may, for example, be word marks or stylised marks, or other non-traditional marks, that happen to be in color, as against being in black and white.
64 If an applicant wishes to file for the international protection of a mark that is a color, or combination of colors, as such, then he should place in box 7(a) a visual representation of the color and check box 7(d).  An indication, in words, of the color(s) should also be given, in item 8(a).  It will generally be required that the color or colors be indicated in a way that is clear, understandable, durable and easily accessible, and this is usually attained by the applicant indicating, by words, the color or colors in question, followed by a reference to an international color classification system, such as Pantone.  
65 If the applicant wishes also to provide a description in words for the color(s) applied to the goods or used in relation to the services that are the subject of the application for protection of a mark that is a mark in color, as such, this should be done in item 9(e), which provides for a description of the mark.  

Color Claimed
66 NOTE:  the indication that the applicant claims color as a distinctive feature of the mark is not to be confused with a mark that consists of color, or of a combination of colors, as such (see above).  
67 Item 8 provides for an indication, in box (a), that the applicant claims color as a distinctive feature of the mark.  A color claim means that the applicant considers the color or colors to be an integral or essential part of the mark.  If color is claimed, the box in item 8(a) should be checked by the applicant to indicate that he is claiming color as a distinctive feature of the mark, and the applicant should also indicate, in words, the color or colors claimed.  In item 8(b), the applicant can further indicate, for each color, the principal parts of the mark that are in the color or colors concerned.  In fact, this is a requirement in certain designated Contracting Parties, where the international application includes a color claim.  
68 NOTE:  in certain designated Contracting Parties, the very fact that the reproduction of the mark is in color will require automatically that color is claimed expressly, giving an indication, in words, or the color(s) concerned.  In order to avoid receiving a notification of provisional refusal from such Contracting Parties, it may be advisable for applicants who are seeking protection for a mark that is in color(s), to include also in the international application a color claim by checking the box in item 8 and completing the remainder of item 8(a).  Reference is made, for example, to Information Notice No. 4/2009, issued by the International Bureau
(see paragraph 109 below) concerning designations of the United States of America (entitled Tips for Holders of International Registrations Seeking Extension of Protection to the United States of America:  Avoiding Provisional Refusals) where a suggestion made by the USPTO was noted as follows:  
“[…] The USPTO encourages the inclusion of a color claim whenever the mark is in color, along with
an indication by words of the color(s) claimed and a description of where the color(s) appear(s) in
the mark.”
69 Please refer to paragraph 54, above regarding the inclusion in box 7(b) of a reproduction of the mark, in color, where the reproduction of the mark in box 7(a) is in black and white and the applicant intends to make a color claim.  
70 NOTE:  if the mark contained in the international application is a color mark and the applicant does not claim color as a distinctive feature of the mark, that does not mean that the International Bureau will or may publish a black and white reproduction of the mark.  The mark as published by the International Bureau
will correspond to the mark that is in the international application, which in turn will correspond to the basic mark – that is to say, a reproduction in color.  

大爱无疆

international application in question – for example, the number of the basic mark, or the Office reference number contained in the faxed international application.  The Office should also sign the page 2 that is being sent.  The Office should endeavour to ensure that the original of page 2 is sent to the International Bureau without delay, and preferably on the same day as the faxed international application is sent.  

52 A box at the bottom of item 7 of the application form is required to be completed by the Office in cases where the Office is sending the original of page 2 in the circumstances just outlined.  

53 Item 7 includes two boxes, side by side.  In most cases, the representation of the mark will be contained in the left hand box, numbered (a) on the form.  

54 A number of Offices do not provide for registration or publication in color.  This is primarily the reason why the second box on the right hand side, numbered (b), has been included in the form.  The only situation when it will be necessary to utilize box (b) will be where color was claimed as a distinctive feature of the basic mark (and thus must be claimed also in the international application), but the reproduction of the basic mark in box (a) is, for the reason indicated above, in black and white.  In such case, the mark must be represented in color also, and reproduced in box (b).  The Gazette will then include representations of the mark in black and white, and also in color, for the purpose of establishing the scope of the color claim.  
55 If the mark is a non-traditional mark – for example, a sound mark, or a three-dimensional mark – the representation of the mark in box (a) that appears in the international application form should correspond with the mark as it appears in the basic application or the basic registration – it being understood that the representation must fit within the box in item 7 of the form.  Thus, if, in the basic application or the basic registration, the representation of a three-dimensional mark is shown by a perspective view, that is how the mark should be represented in the international application form.  If several views have been used to represent the basic mark, those representations should be included in the international application, up to a number such that the representation of the mark, within the box in item 7 of the form, will remain clear.  If the basic mark is a sound mark, it may be represented in the basic application or the basic registration in the format of musical notation or a description in words.  That then is how the mark should be represented in the international application form.  
56 These representations of non-traditional marks may require to be supplemented by a description in
item 9(e) of the form.  Non-graphical representations – for example, a sound recording of a sound mark – must not be included with the international application.  

Mark in Standard Characters/Figurative Mark
57 Item 7 of the international application form contains two boxes that may be checked by the applicant.  The first of these is to indicate that the applicant declares that he wishes the mark to be considered as a mark in standard characters.
58 Generally, a mark that is in standard characters will be equivalent to a regular mark that is a word or words, or letters or numerals, or a combination of those elements, as opposed to a stylised or figurative mark, or a mark that is depicted in a special style, font or color, rather than in a uniform style.  A word mark that is in a stylised script would not normally be considered as a mark in standard characters.  A mark that contains special characters or stylised elements should not be claimed as a mark in standard characters.
59 The issue as to whether a mark is in standard characters is not always straightforward because of the different indications, such as accents, which may be standard in one language and not in another.  It is therefore entirely up to each designated Contracting Party to decide what is the effect of an indication that a mark is in standard characters.  
60 Where the box indicating standard characters has been checked and the mark is clearly not a mark in standard characters, the International Bureau will delete the indication of standard characters.  
61 In this regard, a mark consisting of, or containing non-Latin characters or non-Arabic numerals will not be considered by the International Bureau as a mark in standard characters.  

大爱无疆

40 It is possible that an international application may be founded on more than one basic mark.  In such case, the details of each of the basic marks should be indicated, as above.  If there is not sufficient space, then (unless a
self-generated form has been used) the basic mark with the earliest date should be indicated in item 5 and the remaining details should be indicated on a separate continuation page.  


Item 6:  Priority

41 The claiming of priority should not be confused with a claim of seniority, in the case of a designation of the European Union (EM) – see paragraph 104 below.  

42 If an applicant wishes to claim priority, the box which has been included in item 6 should be checked by the applicant.  The applicant should then indicate the name of the Office with which the earlier filing was made, along with the date of the earlier filing (in order to establish the validity of the claim by virtue of the non-expiry of the six month period).  If the number of the earlier filing is available to the applicant, that should be indicated also.  

43 NOTE:  it is not necessary or appropriate to send to the International Bureau any documentation supporting a priority claim.  

44 It is possible that a priority claim may arise from more than one earlier filing – the goods and services may have been different in the earlier filings, and it is now intended to file a single international application incorporating all the goods and services in a single international registration.  In such case, the details of each earlier filing should be indicated and if there is not sufficient space, then (unless a self-generated form has been used) the necessary indications should be given on a separate continuation page, with the earliest date indicated in item 6.  The applicant should also check the box indicating that more than one priority is being claimed.  

45 It is possible also that an applicant may file an international application for certain goods and services, all of which may not be covered by the priority claim.  Where that arises, the applicant is required to indicate in item 6 the particular goods and services that are in fact covered by the priority claim.  If those goods or services correspond to all the goods or services specified in a given class in the international application form, then it will not be necessary to re-list the goods or services at this point.  It will be sufficient to state, for example, “All goods in classes 9 and 12”.  


Item 7:  The Mark

46 An applicant is required to provide a reproduction of the mark for which international registration is being sought, and this is the subject matter of item 7 of the form.  

47 The reproduction should be two-dimensional and graphic or photographic.  It must be identical with the mark as it appears in the basic application or the basic registration.  Thus, if the mark in the basic application or the basic registration is in black and white, so must the mark be in the international application.  Likewise, if the basic mark is in color, so must be the mark in the international application.  

48 The two boxes in item 7 of the form measure 8cm x 8cm, which is the standard size for publication of the mark in the WIPO Gazette of International Marks (the Gazette).  Where an applicant uses a self-generated form, the reproduction must still comply with these size parameters.  That is to say, the reproduction of the mark must be of a size that would fit within a box measuring 8cm x 8cm.  

49 The reproduction of the mark should be sufficiently clear for the purposes of recording, publication and notification.  If it is not, the International Bureau will treat the international application as irregular and will inform the Office of origin and the applicant accordingly.  

50 As to the format of the reproduction, it may be typed, printed, pasted or reproduced by any other means.  This may often depend upon what is prescribed by the Office of origin.  The mark will ultimately be published in the Gazette exactly in the format in which it has been presented.  

51 If the Office or origin has sent the application form to the International Bureau by fax, it will still be necessary to send to the International Bureau the original of page 2 of the form, bearing the representation of the mark.  Please note that, in such case, only page 2 should be sent and not the entire application form.  If the entire application form is sent in such case, it may be confused as a new international application.  When sending the original of page 2 in the above situation, sufficient indications should appear to enable the International Bureau to identify the

大爱无疆

28 An example may clarify the matter.  The applicant has indicated, in item 1, that the State through which he claims entitlement, and whose Office is therefore the Office of origin, is Germany.  In item 2(b), he indicates as his address an address which is, for example, in Peru (as, of course, he is entitled to do).  He then checks either box three (domicile in Germany) or four (establishment in Germany) in item 3.  Given that the address indicated earlier is an address that is not in Germany, the applicant is therefore required to indicate, in item 3(b), an address, in Germany, which is his domicile or establishment in that State, as the case may be.  


  Entitlement to File Where There are Several Applicants

29 It has already been noted in paragraphs 7 and 14 above that two or more applicants may jointly file a single international application.  In such case, information concerning the entitlement of each of the applicants must be supplied in accordance with item 3 of the application form.  Unless a self-generated form is used, this information should be given on a separate continuation sheet.  


Item 4:  Appointment of a Representative

30 It is not necessary to appoint a representative before the International Bureau in order to file an international application under the Madrid system.  If the applicant wishes to appoint a representative before the International Bureau, item 4 of the application form must be completed (see also paragraph 12, above regarding address for correspondence).  If a representative before the International Bureau has been appointed, all communications from the International Bureau will be sent only to that representative.  

31 The Madrid system does not provide for any requirement as to who may act as representative, in terms of professional qualification, enrolment, nationality, residence or domicile.  

32 Indicating the particulars of the representative in item 4 of the application form is all that is required in order to constitute representation.  It is not necessary to furnish to the International Bureau a power of attorney or any other supplementary documentation.  

33 The information given in item 4 should be sufficiently clear to enable the International Bureau to send correspondence to the representative.  Preferably, a telephone and fax number should be indicated, along with an email address.  

34 If a partnership or firm composed of attorneys or agents is indicated in the application form as representative, only the partnership or firm itself will be recorded as representative.  In other words, if the names of individual attorneys or agents are also included, they will not be considered or recorded as representatives.  

35 The question of representation before the Office of origin, at the national level, or representation before the Office of a designated Contracting Party (for example, for the purpose of responding to a notification of provisional refusal that has been issued by such Office) are outside the scope of the provisions of the Madrid system and are regulated by the law and practice of each individual Contracting Party.  


Item 5:  Basic Application or Basic Registration

36 The particulars of the basic application or basic registration (“basic mark”) are required to be indicated in
item 5 of the international application form.  

37 If the basic mark is a registration in the Office of origin, its registration number and its date of registration should be indicated.  

38 NOTE:  where an international application is founded on a basic registration in the Office of origin, the applicant should not also indicate the particulars of the application which led to that registration.  In other words, simply the particulars of the registration number and date should be indicated.  If, at the same time, the applicant includes the particulars of the application which led to that registration, it is liable to cause confusion.  

39 If the basic mark is an application, rather than a registration, in the Office of origin, its application number and its date should be indicated.  

大爱无疆

18 NOTE:  this applies only to communications originating from the International Bureau;  communications from Offices that are simply transmitted by the International Bureau, such as notifications of refusal, are sent in the language in which they are received from the Office in question.  


  Other Indications

19 It is not compulsory to complete this part of the international application form.  Nevertheless, the indications which are provided for in this part of the form are required by a number of Contracting Parties and if such indications are omitted, the applicant will be likely to meet with a provisional refusal from those Contracting Parties.  It is therefore advised that applicants complete this part of the form.  

20 Where the applicant is a natural person, he may indicate the State of which he is a national.  

21 Where the applicant is a legal entity, such as an incorporated body, the nature of the legal entity may be indicated, along with the name of the State in which it is incorporated or organized.  


Item 3:  Entitlement to File

22 Under the Madrid system, an applicant’s entitlement to file an international application is constituted by nationality, domicile or real and effective commercial or industrial establishment in one of the States that is a Contracting Party of the system.  In the case of the intergovernmental organization which is the European Union, an applicant must have the nationality of a Member State of the Union, or be domiciled or have a commercial or industrial establishment in the territory of the Union.  

23 The interpretation of what may be considered nationality, domicile or real and effective commercial or industrial establishment is a matter for the law of the Contracting Party concerned and is not an issue that the International Bureau is competent to concern itself with.  However, nationality is taken to include both natural persons and legal entities.  In the case of a legal entity, its nationality, depending on national legislation, may be considered as the State in which the legal entity has been constituted or organized, or the place of their actual headquarters.  

24 The term “real or effective commercial or industrial establishment” is taken to mean an establishment at which some commercial or industrial activity takes place, but it is not required that this be the principal place of business of the applicant.  Thus, an applicant may have several real and effective commercial or industrial establishments in different States that are Contracting Parties to the Madrid system.  In such case, the Office of any of those States may qualify as the Office of origin.  However, it is considered that the existence, for example, of a mere warehouse would not constitute “real and effective” establishment.  

25 It is a matter for the Office through which the international application is presented (the Office or origin) to decide whether it requires evidence as to the claimed entitlement of the applicant to file an international application.  As far as the International Bureau is concerned, all that is required is that the applicant checks one of the four boxes in item 3(a).  If the second box is checked (indicating entitlement by virtue of holding the nationality of a State which is a Member State of the European Union), the name of the State in question should be indicated.  

26 If the applicant is in a position to claim entitlement by virtue of more than one type of connection, (through domicile, nationality or commercial or industrial establishment), with the Contracting Party whose Office is the Office of origin, as indicated in item 1 of the application form, then more than a single box may be checked accordingly by the applicant.  

27 Item 3(b) is concerned with a particular situation.  If the applicant has checked either the third or fourth box in item 3(a), indicating domicile or establishment in a given Contracting Party and, at the same time, in item 2(b) has indicated as his address an address which is not in the territory of the Contracting Party that has been indicated at the top of the form in item 1 (i.e., the Contracting Party whose Office is the Office of origin), then he is required, in
item 3(b), to indicate the address of his domicile or establishment in that Contracting Party.  

大爱无疆

9 Where the name of the applicant is in characters other than Latin characters, the name must be indicated as a transliteration into Latin characters, following the phonetics of the language of the international application.  Where the applicant is a legal entity, the transliteration may be replaced by a translation into the language of the international application.  

Address
10 The address of the applicant must be given in such a way as to satisfy the customary requirements for prompt postal delivery.  Where no address of a representative is given in item 4, all communications will be sent to the address of the applicant given in item 2(b).  

11 In addition, in item 2(d), telephone or facsimile numbers and an e-mail address may be given.  The numbers or e-mail address given should be those of the person whom the International Bureau should contact when it needs to get in touch with the applicant.  

Address for Correspondence
12 Where the applicant requires that communications be sent to an address other than that indicated in item 2(b), an address for correspondence may, at the option of the applicant, be indicated in this space.  Otherwise, the field “Address for correspondence” should be left blank.  An example of where it may be appropriate to indicate an address for correspondence may be the case where the international application is being filed by the in-house counsel of a company, and the company’s address may differ from the address used by the in-house counsel.  

13 NOTE:  if it is intended to appoint a representative and thus to have all communications addressed to such representative, it is not correct to indicate the particulars of such representative in item 2(c) “Address for correspondence”.  The appointment of a representative is achieved by completing item 4, which is discussed below.  


Several Applicants
14 Two or more applicants may jointly file a single international application, provided that the basic application or the basic registration is jointly owned by them.  Each of the applicants will be required to have entitlement to file (see Item 3:  “Entitlement to File”) with the Contracting Party whose Office is the Office of origin, which will be indicated in item 1 of the form.  However, it is not necessary that the nature of the particular connection be the same for each applicant.  Thus, Applicant 1 may be a national of the State which is the Contracting Party whose Office is to be the Office of origin, Applicant 2 may be domiciled in that State, and Applicant 3 may have a commercial establishment in that State.  See also paragraph 7, above.  

15 Where there is more than one applicant, the name and address of each applicant should be given, if necessary using a continuation sheet.  

16 Where the international application is jointly filed by two or more applicants with different addresses, and neither the name and address of a representative nor an address for correspondence has been indicated, communications will be sent to the address of the applicant first named in the international application.  In the event that there are several applicants, it may therefore be useful to indicate a single address for correspondence in
item 2(c).  All correspondence will then be sent to that address.  


  Preferred Language for Correspondence

17 The applicant may (by checking the appropriate box) indicate whether he wishes to receive communications from the International Bureau in English, in French or in Spanish, regardless of the language in which the international application was transmitted from the Office of origin to the International Bureau.  On the other hand, if the applicant simply wishes to receive communications from the International Bureau in the language in which the international application was filed, it is not necessary to check any box.  

大爱无疆

EXPLANATORY NOTES
FOR COMPLETION OF OFFICIAL INTERNATIONAL APPLICATION FORM MM2

1 This document aims to facilitate the completion of the official application form MM2 for the international registration of trademarks under the Madrid system.  The form must be completed legibly, and handwritten forms are not acceptable to the International Bureau of WIPO.  If an Office decides to produce its own self-generated version of the official form, such document must include the same content, format and numbering as the official form MM2.  The final layout and spacing of self-generated forms may be modified to take account of the particular circumstances (for example, the inclusion, in sequential order, of the particulars of more than one single applicant).  

Language of the International Application
2 The international application may be in English, French or Spanish, according to what is prescribed by the Office of origin.  That is, the Office of origin is entitled to restrict the choice of the applicant to just one language, or to two languages, or indeed, the Office may permit the applicant to choose between any of the three languages.  Thus, the applicant should ascertain from the Office of origin which language or languages must or may be utilized, in advance of the filing of the application through that Office.  
3 If the requirements concerning language are not complied with, an international application will not be considered as such and will be returned to the sender.  
4 The application form contains two boxes at the top of the first page.  The box on the top left side may be used to indicate firstly, the number of additional continuation sheets (for example, if there is a long list of goods and services in item 10 of the form), and secondly, to indicate the number of forms MM17 that may have been sent with the application form.  (MM17 is the form that is used to file a claim of seniority in the event that the international application includes a designation of the European Union (see paragraph 104 below)).  

APPLICATION FORM

Item 1:  Contracting Party whose Office is the Office of Origin
5 The Office of origin is the Office of the Contracting Party through which the applicant derives entitlement to file the international application.  It is the Office in which the basic application will have been filed or the basic registration will have been recorded.  
6 The name of the State whose Office is the Office of origin should be given in item 1 – for example, “China”.  If the Office of origin is the Office of the intergovernmental organization which is the European Union, then the indication “European Union” should be given.  
7 If there is more than one applicant, the name of only one Contracting Party should be indicated as the Contracting Party whose Office is the Office of origin.  However, each applicant should be eligible or qualify, with respect to that Contracting Party, to file the international application through the Office in question
(see paragraph 14 below).  

Item 2:  The Applicant

Name
8 Where the applicant is a natural person, the name to be indicated is the family (or principal) name and the given (or secondary) name(s) of the natural person as customarily used by that person and in the order in which they are customarily used.  Where the applicant is a legal entity, its full official designation must be given.

大爱无疆

MM2.inf (E)




MADRID AGREEMENT AND PROTOCOL
CONCERNING THE INTERNATIONAL REGISTRATION OF MARKS







EXPLANATORY NOTES ON THE OFFICIAL APPLICATION FORM MM2
APPLICATION FOR INTERNATIONAL REGISTRATION
GOVERNED EXCLUSIVELY BY THE MADRID PROTOCOL
(Rule 9 of the Common Regulations)










World Intellectual Property Organization
34, chemin des Colombettes, P.O. Box 18,
1211 Geneva 20, Switzerland
Tel.:  (41-22) 338 9111
Fax (International Trademark Registry):  (41-22) 740 1429
e-mail:  intreg.mail@wipo.int – Internet:  http://www.wipo.int

大爱无疆

Form
Latest Revision
Description


MM1
Jan 27, 2009
Application for international registration governed exclusively by the Madrid Agreement
[ Note for filing ]


MM2
July 25, 2012
Application for international registration governed exclusively by the Madrid Protocol
[ Note for filing ]


MM2.INF
Feb 2012
Explanatory notes on the official application form MM2 (application for international registration governed exclusively by the Madrid Protocol)


MM3
July 25, 2012
Application for international registration governed by both the Madrid Agreement and the Madrid Protocol
[ Note for filing ]


MM4
July 25, 2012
Designation subsequent to the international registration
[ Note for filing ]


MM5
Jan 1, 2008
Request for the recordal of a Change in Ownership
[ Note for filing ]


MM6
May 18, 2009
Request for the recordal of a Limitation of the List of Goods and Services
[ Note for filing ]


MM7
May 1, 2003
Request for the recordal of a Renunciation
[ Note for filing ]


MM8
Mar 1, 2006
Request for the recordal of a Cancellation of the International Registration


MM9
Jan 1, 2008
Request for the recordal of a Change in Name and/or Address of the Holder
[ Note for filing ]


MM10
May 1, 2003
Request for the recordal of a Change in Name and/or Address of the Representative
[ Note for filing ]


MM11
July 25, 2012
Renewal of the international registration
[ Note for filing ]


MM12
Jun 1, 2003
Appointment of a representative
[ Note for filing ]


MM13
Jan 1, 2008
Request for the Recording of a License
[ Note for filing ]


MM14
Jan 1, 2008
Request for Amendment of the Recording of a License


MM15
Jul 1, 2006
Request for Cancellation of the Recording of a License


MM16
Dec 21, 2009
Subsequent Designation resulting from Conversion (European Union)
[ Note for filing ]


MM17
Dec 21, 2009
Claim of Seniority (European Union)
[ Note for filing ]


MM18
Apr 1, 2004
Declaration of intention to use the mark (United States of America)
[ Note for filing ]


MM19
July 25, 2012
Request for the recording of a restriction of the holder's right of disposal
[ Note for filing ]